🔥 Đề thi HOT:

222 người thi tuần này

30 đề thi THPT Quốc gia môn Tiếng Anh năm 2022 có lời giải (Đề 1)

252.1 K lượt thi 50 câu hỏi
181 người thi tuần này

20 Đề thi thử THPTQG môn Tiếng Anh cực hay có đáp án (Đề số 1)

142.1 K lượt thi 50 câu hỏi
101 người thi tuần này

30 đề luyện thi Đại Học môn Tiếng Anh cực hay có lời giải (Đề số 1)

219.4 K lượt thi 50 câu hỏi
61 người thi tuần này

Tuyển tập đề thi thử Tiếng Anh cực hay có lời giải (Đề số 1)

142.8 K lượt thi 50 câu hỏi
42 người thi tuần này

Tổng hợp đề thi thử tiếng anh thpt quốc gia (Đề số 1)

109.4 K lượt thi 50 câu hỏi
41 người thi tuần này

Tổng hợp đề thi thử THPTQG môn Tiếng Anh có đáp án (Đề số 1)

81.8 K lượt thi 50 câu hỏi

Danh sách câu hỏi:

Câu 18:

Let’s go for a long  walk, __________we?

Xem đáp án

Câu 20:

My sister is an expert on wildlife and its

Xem đáp án

Câu 21:

Mark the letter A, B, C or D on your answer sheet to indicate the correct answer to each of the following questions.

A__________ship was moored at the quay

Xem đáp án

Câu 47:

Read the following passage and mark the letter A, B, C or D on your answer sheet to indicate the correct answer to each of the questions

Three mile island nuclear power plant

America’s worst accident at a civilian nuclear power plant occurred on March 28, 1979, at Three Mile Island. Operators were trying to repair a problem with piping in the water circulation system, and they accidentally blocked the flow of water. This stopped the removal of heat from the reactor, and began a series of events that would change the way America thought about nuclear power.

Within ten seconds after the flow of water was blocked, the reactor vessel became hotter and the pressure rose. Safety control rods were automatically thrust down into the reactor, causing the chain reaction to stop completely. Pressure, however, continued to build. A relief valve opened but failed to close. As a result, too much water escaped, and the reactor began to melt down.

[1] Large quantities of radioactivity began to leak from the reactor. [2] Most of the radioactivity was contained, and it is likely that no one received a harmful amount of radiation. [3] “Three Mile Island” became the reason that many Americans are afraid of nuclear power to this day. [4]

It can be inferred that removing heat from a reactor is important because

Xem đáp án

Câu 51:

Read the following passage and mark the letter A, B, C or D on your answer sheet to indicate the correct answer to each of the questions

Three mile island nuclear power plant

America’s worst accident at a civilian nuclear power plant occurred on March 28, 1979, at Three Mile Island. Operators were trying to repair a problem with piping in the water circulation system, and they accidentally blocked the flow of water. This stopped the removal of heat from the reactor, and began a series of events that would change the way America thought about nuclear power.

Within ten seconds after the flow of water was blocked, the reactor vessel became hotter and the pressure rose. Safety control rods were automatically thrust down into the reactor, causing the chain reaction to stop completely. Pressure, however, continued to build. A relief valve opened but failed to close. As a result, too much water escaped, and the reactor began to melt down.

[1] Large quantities of radioactivity began to leak from the reactor. [2] Most of the radioactivity was contained, and it is likely that no one received a harmful amount of radiation. [3] “Three Mile Island” became the reason that many Americans are afraid of nuclear power to this day. [4]

What is the most likely reason why many Americans are still afraid of nuclear island?

Xem đáp án

Câu 54:

Read the followingpassage and mark the letter A, B, C or D onyour answer sheet to indicate the correct answer to each of the questions

Stellar Astronomy

Many parameters are used to describe a star. One of them is its temperature, which can be determined by simple observation; the color of a star and its temperature are related. Once the color of a star is identified, its temperature can be calculated through the use of scientific principles such as Wien’s Law.

There are different types of stars in the universe. For our purposes, we can classify them into two categories: variable and binary. Variable stars are those which show some degree of variability in their luminosity and magnitude. Luminosity refers to the amount of energy radiated by a star, while magnitude refers to its brightness. At time the degree of variability may be high, requiring a telescope with an equally high light- gathering power. This can be achieved by using a lens of large diameter, such as that of a reflecting telescope.

Binary stars are those found in pairs that revolve around a common center. The closest star to the sun, Proxima Centauri, is a binary star. To observe a binary star, the resolving power of a telescope - its ability to distinguish between two close objects having a small angular separation - must be very high.

Stellar astronomy is possible for a everyone, well beyond mere looking at the sky with the naked eye in order to identify constellations. With two basic of telescopes and rudimentary knowledge, much exploration can be achieved.

What is the topic of the passage?

Xem đáp án

Câu 55:

Read the followingpassage and mark the letter A, B, C or D onyour answer sheet to indicate the correct answer to each of the questions

Stellar Astronomy

Many parameters are used to describe a star. One of them is its temperature, which can be determined by simple observation; the color of a star and its temperature are related. Once the color of a star is identified, its temperature can be calculated through the use of scientific principles such as Wien’s Law.

There are different types of stars in the universe. For our purposes, we can classify them into two categories: variable and binary. Variable stars are those which show some degree of variability in their luminosity and magnitude. Luminosity refers to the amount of energy radiated by a star, while magnitude refers to its brightness. At time the degree of variability may be high, requiring a telescope with an equally high light- gathering power. This can be achieved by using a lens of large diameter, such as that of a reflecting telescope.

Binary stars are those found in pairs that revolve around a common center. The closest star to the sun, Proxima Centauri, is a binary star. To observe a binary star, the resolving power of a telescope - its ability to distinguish between two close objects having a small angular separation - must be very high.

Stellar astronomy is possible for a everyone, well beyond mere looking at the sky with the naked eye in order to identify constellations. With two basic of telescopes and rudimentary knowledge, much exploration can be achieved.

The temperature of a star can be determined by its

Xem đáp án

Câu 56:

Read the followingpassage and mark the letter A, B, C or D onyour answer sheet to indicate the correct answer to each of the questions

Stellar Astronomy

Many parameters are used to describe a star. One of them is its temperature, which can be determined by simple observation; the color of a star and its temperature are related. Once the color of a star is identified, its temperature can be calculated through the use of scientific principles such as Wien’s Law.

There are different types of stars in the universe. For our purposes, we can classify them into two categories: variable and binary. Variable stars are those which show some degree of variability in their luminosity and magnitude. Luminosity refers to the amount of energy radiated by a star, while magnitude refers to its brightness. At time the degree of variability may be high, requiring a telescope with an equally high light- gathering power. This can be achieved by using a lens of large diameter, such as that of a reflecting telescope.

Binary stars are those found in pairs that revolve around a common center. The closest star to the sun, Proxima Centauri, is a binary star. To observe a binary star, the resolving power of a telescope - its ability to distinguish between two close objects having a small angular separation - must be very high.

Stellar astronomy is possible for a everyone, well beyond mere looking at the sky with the naked eye in order to identify constellations. With two basic of telescopes and rudimentary knowledge, much exploration can be achieved.

Which of the following is true of variable stars?

Xem đáp án

Câu 57:

Read the followingpassage and mark the letter A, B, C or D onyour answer sheet to indicate the correct answer to each of the questions

Stellar Astronomy

Many parameters are used to describe a star. One of them is its temperature, which can be determined by simple observation; the color of a star and its temperature are related. Once the color of a star is identified, its temperature can be calculated through the use of scientific principles such as Wien’s Law.

There are different types of stars in the universe. For our purposes, we can classify them into two categories: variable and binary. Variable stars are those which show some degree of variability in their luminosity and magnitude. Luminosity refers to the amount of energy radiated by a star, while magnitude refers to its brightness. At time the degree of variability may be high, requiring a telescope with an equally high light- gathering power. This can be achieved by using a lens of large diameter, such as that of a reflecting telescope.

Binary stars are those found in pairs that revolve around a common center. The closest star to the sun, Proxima Centauri, is a binary star. To observe a binary star, the resolving power of a telescope - its ability to distinguish between two close objects having a small angular separation - must be very high.

Stellar astronomy is possible for a everyone, well beyond mere looking at the sky with the naked eye in order to identify constellations. With two basic of telescopes and rudimentary knowledge, much exploration can be achieved.

Why does the author write that “stellar astronomy is possible for everyone”?

Xem đáp án

Câu 58:

Read the followingpassage and mark the letter A, B, C or D onyour answer sheet to indicate the correct answer to each of the questions

Stellar Astronomy

Many parameters are used to describe a star. One of them is its temperature, which can be determined by simple observation; the color of a star and its temperature are related. Once the color of a star is identified, its temperature can be calculated through the use of scientific principles such as Wien’s Law.

There are different types of stars in the universe. For our purposes, we can classify them into two categories: variable and binary. Variable stars are those which show some degree of variability in their luminosity and magnitude. Luminosity refers to the amount of energy radiated by a star, while magnitude refers to its brightness. At time the degree of variability may be high, requiring a telescope with an equally high light- gathering power. This can be achieved by using a lens of large diameter, such as that of a reflecting telescope.

Binary stars are those found in pairs that revolve around a common center. The closest star to the sun, Proxima Centauri, is a binary star. To observe a binary star, the resolving power of a telescope - its ability to distinguish between two close objects having a small angular separation - must be very high.

Stellar astronomy is possible for a everyone, well beyond mere looking at the sky with the naked eye in order to identify constellations. With two basic of telescopes and rudimentary knowledge, much exploration can be achieved.

Why does a telescope need to have a high-gathering ability?

Xem đáp án

Câu 59:

Read the followingpassage and mark the letter A, B, C or D onyour answer sheet to indicate the correct answer to each of the questions

Stellar Astronomy

Many parameters are used to describe a star. One of them is its temperature, which can be determined by simple observation; the color of a star and its temperature are related. Once the color of a star is identified, its temperature can be calculated through the use of scientific principles such as Wien’s Law.

There are different types of stars in the universe. For our purposes, we can classify them into two categories: variable and binary. Variable stars are those which show some degree of variability in their luminosity and magnitude. Luminosity refers to the amount of energy radiated by a star, while magnitude refers to its brightness. At time the degree of variability may be high, requiring a telescope with an equally high light- gathering power. This can be achieved by using a lens of large diameter, such as that of a reflecting telescope.

Binary stars are those found in pairs that revolve around a common center. The closest star to the sun, Proxima Centauri, is a binary star. To observe a binary star, the resolving power of a telescope - its ability to distinguish between two close objects having a small angular separation - must be very high.

Stellar astronomy is possible for a everyone, well beyond mere looking at the sky with the naked eye in order to identify constellations. With two basic of telescopes and rudimentary knowledge, much exploration can be achieved.

The word “parameters” in paragraph 1 is closest in meaning to

Xem đáp án

Câu 60:

Read the followingpassage and mark the letter A, B, C or D onyour answer sheet to indicate the correct answer to each of the questions

Stellar Astronomy

Many parameters are used to describe a star. One of them is its temperature, which can be determined by simple observation; the color of a star and its temperature are related. Once the color of a star is identified, its temperature can be calculated through the use of scientific principles such as Wien’s Law.

There are different types of stars in the universe. For our purposes, we can classify them into two categories: variable and binary. Variable stars are those which show some degree of variability in their luminosity and magnitude. Luminosity refers to the amount of energy radiated by a star, while magnitude refers to its brightness. At time the degree of variability may be high, requiring a telescope with an equally high light- gathering power. This can be achieved by using a lens of large diameter, such as that of a reflecting telescope.

Binary stars are those found in pairs that revolve around a common center. The closest star to the sun, Proxima Centauri, is a binary star. To observe a binary star, the resolving power of a telescope - its ability to distinguish between two close objects having a small angular separation - must be very high.

Stellar astronomy is possible for a everyone, well beyond mere looking at the sky with the naked eye in order to identify constellations. With two basic of telescopes and rudimentary knowledge, much exploration can be achieved.

The word “ rudimentary” in paragraph 4 is closest in meaning to

Xem đáp án

Câu 61:

Read the followingpassage and mark the letter A, B, C or D onyour answer sheet to indicate the correct answer to each of the questions

Stellar Astronomy

Many parameters are used to describe a star. One of them is its temperature, which can be determined by simple observation; the color of a star and its temperature are related. Once the color of a star is identified, its temperature can be calculated through the use of scientific principles such as Wien’s Law.

There are different types of stars in the universe. For our purposes, we can classify them into two categories: variable and binary. Variable stars are those which show some degree of variability in their luminosity and magnitude. Luminosity refers to the amount of energy radiated by a star, while magnitude refers to its brightness. At time the degree of variability may be high, requiring a telescope with an equally high light- gathering power. This can be achieved by using a lens of large diameter, such as that of a reflecting telescope.

Binary stars are those found in pairs that revolve around a common center. The closest star to the sun, Proxima Centauri, is a binary star. To observe a binary star, the resolving power of a telescope - its ability to distinguish between two close objects having a small angular separation - must be very high.

Stellar astronomy is possible for a everyone, well beyond mere looking at the sky with the naked eye in order to identify constellations. With two basic of telescopes and rudimentary knowledge, much exploration can be achieved.

The word “radiated” in paragraph 2 is closest in meaning to

Xem đáp án

Câu 62:

Read the followingpassage and mark the letter A, B, C or D onyour answer sheet to indicate the correct answer to each of the questions

Stellar Astronomy

Many parameters are used to describe a star. One of them is its temperature, which can be determined by simple observation; the color of a star and its temperature are related. Once the color of a star is identified, its temperature can be calculated through the use of scientific principles such as Wien’s Law.

There are different types of stars in the universe. For our purposes, we can classify them into two categories: variable and binary. Variable stars are those which show some degree of variability in their luminosity and magnitude. Luminosity refers to the amount of energy radiated by a star, while magnitude refers to its brightness. At time the degree of variability may be high, requiring a telescope with an equally high light- gathering power. This can be achieved by using a lens of large diameter, such as that of a reflecting telescope.

Binary stars are those found in pairs that revolve around a common center. The closest star to the sun, Proxima Centauri, is a binary star. To observe a binary star, the resolving power of a telescope - its ability to distinguish between two close objects having a small angular separation - must be very high.

Stellar astronomy is possible for a everyone, well beyond mere looking at the sky with the naked eye in order to identify constellations. With two basic of telescopes and rudimentary knowledge, much exploration can be achieved.

Complete the summary by choosing one sentence (A, B, C or D) that is among the most important information to fill in the blank.

Xem đáp án

Câu 63:

Read the followingpassage and mark the letter A, B, C or D onyour answer sheet to indicate the correct answer to each of the questions

Stellar Astronomy

Many parameters are used to describe a star. One of them is its temperature, which can be determined by simple observation; the color of a star and its temperature are related. Once the color of a star is identified, its temperature can be calculated through the use of scientific principles such as Wien’s Law.

There are different types of stars in the universe. For our purposes, we can classify them into two categories: variable and binary. Variable stars are those which show some degree of variability in their luminosity and magnitude. Luminosity refers to the amount of energy radiated by a star, while magnitude refers to its brightness. At time the degree of variability may be high, requiring a telescope with an equally high light- gathering power. This can be achieved by using a lens of large diameter, such as that of a reflecting telescope.

Binary stars are those found in pairs that revolve around a common center. The closest star to the sun, Proxima Centauri, is a binary star. To observe a binary star, the resolving power of a telescope - its ability to distinguish between two close objects having a small angular separation - must be very high.

Stellar astronomy is possible for a everyone, well beyond mere looking at the sky with the naked eye in order to identify constellations. With two basic of telescopes and rudimentary knowledge, much exploration can be achieved.

Complete the table by choosing a phrase to match the heading

Xem đáp án

4.6

11288 Đánh giá

50%

40%

0%

0%

0%